Stand Cylinder

Description

A cylinder-shaped standing luminaire. This parametric model allows you to define the TotalHeight and the Height of the luminaire, not including the stand.

• The full default height will be 1.8 meters.
• The stand height is the TotalHeight minus the luminaire Height.
• The stand is always in the middle of the luminaire.
• Default diameter of the foot will be the same as the main Diameter.
• Default height of the foot is 2 cm.
• Diameter of the stand is 5 cm.
• Luminous dimensions must be smaller than the main dimensions.
• Type ➜ Direct: LEO and LES placed at the bottom center of the luminaire. Grows upwards with LumimousHeight.
• Type ➜ Indirect: LEO and LES placed at the top center of the luminaire. Grows downwards with LumimousHeight.
• Type ➜ DirectIndirect: LEO placed in the center of the luminaire. LES on top and bottom surfaces centered.

Parameter	Type	Explanation
Diameter	int	value in mm
Height	int	value in mm
TopDiameter	int	value in mm
LuminousDiameter	int	value in mm
LuminousHeight	int	value in mm
TotalHeight	int	value in mm

XSD

<xs:element name="StandCylinder">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="Diameter" type="xs:int"/>
      <xs:element name="Height" type="xs:int"/>
      <xs:element name="TopDiameter" type="xs:int" minOccurs="0"/>
      <xs:element name="LuminousDiameter" type="xs:int"/>
      <xs:element name="LuminousHeight" type="xs:int" minOccurs="0"/>
      <xs:element name="TotalHeight">
    </xs:sequence>
  </xs:complexType>
</xs:element>

XML

<P3D>
  <StandCylinder>
    <Diameter>390</Diameter>
    <Height>80</Height>
    <LuminousDiameter>370</LuminousDiameter>
    <TotalHeight>1800</TotalHeight>
  </StandCylinder>
</P3D>