Stand Cuboid Side

Description

Stand Cuboid Side is a cube-shaped standing luminaire with the head attached on the side rather than the center. This parametric model allows you to define the TotalHeight and the Height of the luminaire (not including the stand).

• The full default height is 1.8 meters.
• The stand height is calculated as TotalHeight minus the luminaire Height.
• The stand is always in the middle of the luminaire.
• The default size of the foot is 80% of the main size.
• The default height of the foot is 2 cm and the diameter of the stand is 5 cm.
• Luminous dimensions must be smaller than the main dimensions.
• Type defines the placement and growth direction of light emitters:
  • Direct: LEO and LES are placed at the bottom center of the luminaire and grow upwards with LuminousHeight.
  • Indirect: LEO and LES are placed at the top center of the luminaire and grow downwards with LuminousHeight.
  • DirectIndirect: LEO is placed in the center of the luminaire and LES on the top and bottom surfaces are centered.
• The luminaire head is aligned in the direction of C0.

Note: Any reference to additional parameters such as C90 is omitted as they are not defined in the schema.

Parameters

Parameter	Type	Explanation
Width	int	Value in mm.
Length	int	Value in mm.
Height	int	Value in mm.
LuminousWidth	int	Value in mm.
LuminousLength	int	Value in mm.
TopWidth	int	Value in mm (optional; default is 80% of Width)
TopLength	int	Value in mm (optional; default is 80% of Length)
TotalHeight	int	Value in mm.
LuminousHeight	int	Value in mm (optional); describes how far the luminous part protrudes from the body
ReflectorDepth	int	Value in mm (optional); describes how far the luminous part is recessed into the body
Type	string	One of: Direct, Indirect, DirectIndirect (optional)
HousingColor	string	4 digit RAL color code (optional)
FileName	string	Optional file name (without an extension) (optional)

XSD

<xs:element name="StandCuboidSide">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="Width" type="xs:int"/>
      <xs:element name="Length" type="xs:int"/>
      <xs:element name="Height" type="xs:int"/>
      <xs:element name="LuminousWidth" type="xs:int"/>
      <xs:element name="LuminousLength" type="xs:int"/>
      <xs:element name="TopWidth" type="xs:int" minOccurs="0"/>
      <xs:element name="TopLength" type="xs:int" minOccurs="0"/>
      <xs:element name="TotalHeight" type="xs:int"/>
      <xs:choice minOccurs="0">
        <xs:element name="LuminousHeight" type="xs:int" minOccurs="0"/>
        <xs:element name="ReflectorDepth" type="xs:int" minOccurs="0"/>
      </xs:choice>
      <xs:element name="Type" minOccurs="0">
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:enumeration value="Direct"/>
            <xs:enumeration value="Indirect"/>
            <xs:enumeration value="DirectIndirect"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="HousingColor" minOccurs="0">
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:pattern value="[1-9][0-9]{3}"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="FileName" type="xs:string" minOccurs="0"/>
    </xs:sequence>
  </xs:complexType>
</xs:element>

XML

Example

<P3D filename="StandCuboidSide">
  <StandCuboidSide>
    <Width>350</Width>
    <Length>350</Length>
    <Height>150</Height>
    <LuminousWidth>340</LuminousWidth>
    <LuminousLength>340</LuminousLength>
    <TopWidth>250</TopWidth>
    <TopLength>250</TopLength>
    <TotalHeight>600</TotalHeight>
    <LuminousHeight>50</LuminousHeight>
    <HousingColor>9005</HousingColor>
    <FileName>example_filename</FileName>
  </StandCuboidSide>
</P3D>