Sphere

Description

This model consists of a sphere on a base if the base height is greater than 0.

• Diameter describes the diameter of the sphere.
• BaseHeight and Diameter represent the size of the base.
• If you set the mounting type to Pendulum, the value PendulumLength will specify the length of the pendulum.
• The default base diameter will be 60% of the diameter of the sphere.
• The height of the base will be 2 times the distance between the edge of the sphere and the interesction with the sphere.

Parameter	Type	Explanation
Diameter	int	value in mm
BaseHeight	int	value in mm
BaseDiameter	int	value in mm
Mounting	int	Ceiling, Wall, Floor, Pendulum
PendulumLength	int	value in mm

XSD

<xs:element name="Sphere">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="Diameter" type="xs:int"/>
      <xs:element name="BaseHeight" type="xs:int" minOccurs="0"/>
      <xs:element name="BaseDiameter" type="xs:int" minOccurs="0"/>
      <xs:element name="Mounting">
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:enumeration value="Ceiling"/>
            <xs:enumeration value="Wall"/>
            <xs:enumeration value="Floor"/>
            <xs:enumeration value="Pendulum"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="PendulumLength" type="xs:int" minOccurs="0"/>
    </xs:sequence>
  </xs:complexType>
</xs:element>

XML

<P3D>
  <Sphere>
    <Diameter>200</Diameter>
    <BaseHeight>40</BaseHeight>
    <BaseDiameter>80</BaseDiameter>
    <Mounting>Ceiling</Mounting>
    <PendulumLength>0</PendulumLength>
  </Sphere>
</P3D>