Stand Cuboid Centered

Description

Stand Cuboid Centered is a cube-shaped standing luminaire. This parametric model allows you to define the TotalHeight and the Height of the luminaire (not including the stand).

• The stand height is calculated as TotalHeight minus the luminaire Height. The stand is always centered within the luminaire.
• The default foot dimensions are the same as the main Length and Width.
• The default foot height is 2 cm. The width and length of the stand are 5 cm.
• Luminous dimensions must be smaller than the main dimensions.
• Either LuminousHeight or ReflectorDepth can be specified to describe how the luminaire interacts with the stand:
  • LuminousHeight: Describes how far the luminous part sticks out of the body.
  • ReflectorDepth: Describes how far the luminous part is recessed into the body.
• Type defines the placement and growth direction of light emitters:
  • Direct: LEO and LES are placed at the bottom center of the luminaire. All four sides grow upwards with LuminousHeight.
  • Indirect: LEO and LES are placed at the top center of the luminaire. All four sides grow downwards with LuminousHeight.
  • DirectIndirect: LEO is placed in the center of the luminaire. LES on the top and bottom surfaces are centered. A LuminousHeight greater than 0 results in LES on all four surfaces.
• Optionally, HousingColor can be provided as a 4-digit RAL color code.
• Optionally, FileName can be provided (without an extension).

Parameters

Parameter	Type	Explanation
Width	int	Value in mm.
Length	int	Value in mm.
Height	int	Value in mm.
LuminousWidth	int	Value in mm.
LuminousLength	int	Value in mm.
TopWidth	int	Value in mm (optional; default is 80% of Width)
TopLength	int	Value in mm (optional; default is 80% of Length)
TotalHeight	int	Value in mm.
LuminousHeight	int	Value in mm (optional); describes how far the luminous part protrudes from the body.
ReflectorDepth	int	Value in mm (optional); describes how far the luminous part is recessed into the body.
Type	string	One of: Direct, Indirect, DirectIndirect (optional)
HousingColor	string	4 digit RAL color code (optional)
FileName	string	Optional file name (without an extension) (optional)

XSD

<xs:element name="StandCuboidCentered">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="Width" type="xs:int"/>
      <xs:element name="Length" type="xs:int"/>
      <xs:element name="Height" type="xs:int"/>
      <xs:element name="LuminousWidth" type="xs:int"/>
      <xs:element name="LuminousLength" type="xs:int"/>
      <xs:element name="TopWidth" type="xs:int" minOccurs="0"/>
      <xs:element name="TopLength" type="xs:int" minOccurs="0"/>
      <xs:element name="TotalHeight" type="xs:int"/>
      <xs:choice minOccurs="0">
        <xs:element name="LuminousHeight" type="xs:int" minOccurs="0"/>
        <xs:element name="ReflectorDepth" type="xs:int" minOccurs="0"/>
      </xs:choice>
      <xs:element name="Type" minOccurs="0">
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:enumeration value="Direct"/>
            <xs:enumeration value="Indirect"/>
            <xs:enumeration value="DirectIndirect"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="HousingColor" minOccurs="0">
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:pattern value="[1-9][0-9]{3}"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="FileName" type="xs:string" minOccurs="0"/>
    </xs:sequence>
  </xs:complexType>
</xs:element>

XML

Example

<P3D filename="StandCuboidCentered">
  <StandCuboidCentered>
    <Width>350</Width>
    <Length>350</Length>
    <Height>150</Height>
    <LuminousWidth>340</LuminousWidth>
    <LuminousLength>340</LuminousLength>
    <TopWidth>250</TopWidth>
    <TopLength>250</TopLength>
    <TotalHeight>600</TotalHeight>
    <LuminousHeight>50</LuminousHeight>
    <HousingColor>9005</HousingColor>
    <FileName>example_filename</FileName>
  </StandCuboidCentered>
</P3D>