Bollard Cylinder

Description

BollardCylinder is a Cylinder-shaped bollard with a luminous surface around the model.

• The parameter Height will set the height of the head, whereas the TotalHeight will affect the size of the entire model.
• The default setting is one luminous surface aligned to C0.
• The default distance of the luminous surface is 2% of the height measured from the upper edge.
• There is only one size for luminous surfaces.
• Any Value in C0, C90, C180 and C270 greater than zero means there will be a luminuous surface as defined in the luminous dimensions.

Parameter	Type	Explanation
Diameter	int	value in mm
Height	int	value in mm
LuminousHeight	int	value in mm
TotalHeight	int	value in mm
C0	int	value in mm
C90	int	value in mm
C180	int	value in mm
C270	int	value in mm

XSD

<xs:element name="BollardCylinder">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="Diameter" type="xs:int"/>
      <xs:element name="Height" type="xs:int" minOccurs="0"/>
      <xs:element name="LuminousHeight" type="xs:int" minOccurs="0"/>
      <xs:element name="TotalHeight" type="xs:int" minOccurs="0"/>
      <xs:element name="C0" type="xs:int" minOccurs="0"/>
      <xs:element name="C90" type="xs:int" minOccurs="0"/>
      <xs:element name="C180" type="xs:int" minOccurs="0"/>
      <xs:element name="C270" type="xs:int" minOccurs="0"/>
    </xs:sequence>
  </xs:complexType>
</xs:element>

XML

<P3D>
  <BollardCylinder>
    <Diameter>190</Diameter>
    <Height>1200</Height>
    <LuminousHeight>240</LuminousHeight>
    <TotalHeight>1200</TotalHeight>
  </BollardCylinder>
</P3D>